Dane techniczne
Control: GE FANUC Series 16-GC
Operating hours: 42727
Technical data
Centre height: 175 mm
Distance between centres: 1000 mm
Workpiece weight on centres max.: 130 kg
Workpiece dimensions:
Grinding weehl left side:
Diameter: 400 mm
Width: 80 mm
Bore: 127 mm
Grinding wheel right side:
Diameter: 400 mm
Width: 80 mm
Bore: 127 mm
B axis resolution max.: 5 °
B axis swivelling range (automatic): 15° + 205 °
Grinding wheel speeds:
number (steps): 2
up to: 1670 / 2110 rpm
Peripheral speed: 35 m/s
Rotatable grinding spindle head (b-axis): 5 °
Revolving unit with Hirth serration
Longitudinal slide:
Max. travel: 1050 mm
Resolution: 0.0001 mm
Feed speed up: 0.0001 - 10000 mm/min
Transversal slide:
Max. travel: 275 mm
Resolution: 0.0001 mm
Feed speed up: 0.0001 - 10000 mm/min
Work piece spindle head:
speeds:
from: 30 rpm
up to: 750 rpm
rotatable: 90 °
taper in spindle: MT: 5
Required power: 0.785 kW
Tailstock:
Hydraulic return
Taper in tailstock:: 3 MT
Tailstock travel of barrel: 35 mm
Max. table angular displacement: 8.5 °
Air connect: 5 bar
Voltage 50 Hz 3x: 400 Volt
Workpiece spindle motor: 7.5 kW
Total power required: 30 kVA
Machine's weight about: 5100 kg
Overall dimensions machine:
Length: 3750 mm
Width: 1200 mm
Height: 2300 mm
Various accessories:
Coolant system
Paper filter facility
Internal grinding attachment:
Number of spindles: 1
up to: 60000 rpm
Lamp
Tailstock with fine adjustement
Electronic hand held control
Handlowiec: MULLER MACHINES SA
Zapytaj o cenę