Technische gegevens
-
Make : Waldrich - Siegen
-
Typ : PF-F-150(1)-530/400
-
No. : 11.093/0
-
Age : Overhault 2004 ( Euro 2.2 Mil)
-
X Travel : 12.000
-
Y Travel :
7.300
Z Travel :
3.000
-
W Travel :
4.000
-
Between column : 5.000
-
Table width : 4.730
-
Table length : 12.000
-
Table load :
19 t / mtr. Ca. 250 ton
-
Table feed : 10.000 mm/min.
W axis : 3.000 mm/min.
-
T axis : 6.000 mm/min.
Cross adj. milling head :
-
Vert. adj. cross rail :
Horizontal hydrostatic spindle ram
-
Milling spindle Ø :
560
-
Milling tool taper :
iso 60
-
C axis feed :
5.000 mm/min.
-
Milling motor :
90 kW
-
Spindle speed :
2.500 R/pm
-
Z axis stroke :
3.000
-
Z axis feed :
2.000 mm/min.
Milling Küma Angle head WF2 90 kw-
450
-
Milling Küma Uni. UB1D 60 kw - 2400
-
Milling Küma Fixed GB1D 90 kw- 2400
-
Milling Küma Angle head WF1?
-
Electric requirement
: 3 x 400 V / 50 Hz
-
Power requirement
: 600 kVA / 630 Amp
-
Capacity 4.000 L coolant true spindle 20/40 Bar
Machine is rebuild
in 2004 by Schiess
Bed –
Table assembly group:
*
Renewal of sliding lining
*
Grinding of guideway
* Renewal of table
drive
* Direct linear
measuring syst.
Hydrostatic
Portal
and cross rail:
* Modification
of adjusting spindle trape
Zoidal spindle was recplaced with
ball screw
* Direct linear
measuring syst.
* New drive motors
for relization of higer
speed on feed axes
of milling support.
New milling support with hydrostatic guideways
Electric
system:
* Complet
elctric cabinet switchgear
* Complet
new wire
* Siemens Sinumrik 840 D in 6 axis !!
Equipment
/ parts :
* Complet new raumag janich covers
* Complet new double
chip conveyor
* Complet with big
tooling packet
* Complet with big
mounting equipment
Under power in Europe
-
Free directly
-
Controlled axis X / Y / Z / W / C / B axis
-
Over all height :
10.475 mm
-
Over all width :
11.934 mm
-
Over all length :
30.000 mm
-
Total
weight : ca. 350.000 Kg
Handelaar: MACH4METAL BV
Prijsaanvraag