Technische gegevens
Manufacturing origin Swiss
Voltage 380/50/3
Netweight 1400 kg
Custom position 8458.1120
Dimensions 170x125x165 cm
TECHNICAL DATA
Capacities :
Maximum turning diameter 270 mm
Maximum swing over carriage 115 mm
Height of centres over carriage 60 mm
Maximum swing over bed 270 mm
Turning length between centres (according to equipment) 400 mm
Headstock :
Standardized spindle nose, for use of several collets and jaw-chucks by means of adapter sleeves
SCHAUBLIN collets B32
Maximum throughbore, dia. 24 mm
Diameter of standard chck 130 mm
Direct AC motor drive, power at 100%/50% duty factor 5,5/7,5 kW
Max. torque at 100%/50% duty factor 42/60 Nm
Spindle speeds, stepless 5000 min-1
Pneumatic closing cylinder, maximum 5 bar 1150 daN
Apron and carriage :
Transverse stroke (X-axis) 180 mm
Resolution, on radius 0,0005 mm
AC motor drive, torque 2,9 Nm
Ball screw, dia. x pitch 20 x 5 mm
Longitudinal stroke (Z-axis) 400 mm
Resolution 0,001 mm
AC motor drive, torque 2,9 Nm
Ball screw, dia. x pitch 32 x 5 mm
Feeds :
Working feeds, X-/Z-axis, stepless 0-5000 mm/min
Rapid feed, X-/Z-axis 7,5 m/min
Feed pressure, X-/Z-axis 500 daN
Tooling system Linear :
Number of toolholders (depending on workpiece dia.),
Radial 2
Frontal 2-5
Colletsholder ESX 20
Bar holder 20 mm
MULTIFIX system 16 x 16 mm
Coolant supply :
Capacity of coolant tank 55 litres
Pump power 10 l/min
Pressure 1,7 bars
errors and omissions excepted data gived without obligation
Inventory Nr. 2180002 Machine’s accessories list :
1 Set of soft jaws
1 adjustable extractor stop u Spannzange B-32, art.125-27.070
1 Set of 51 collets B32 Ø 2,0 to 24 mm per 0,5 mm except Ø 16
1 Chuck adjustment plate Ø 150 mm., art.125-20.063
4 Levelling elements
1 Sole plate with thread M14 width 60 mm height 34 mm., 125-46.530
1 Tool-holder MULTIFIX type A, art.125-46.200
1 Chisel-holder MULTIFIX type AD 1675, art.125-46.220
4 Sole plates for tool-holder width 36 mm., 110-46.000
3 Adjustable Tool-holder Ø 20 mm., art.110-46.020
3 Collet holder CY 20 / ESX 20 with blocking nut, art.104-46.110
1 Rear frontal tool-holder , width 36 mm - 12x12, art.110-46.050
1 Front frontal tool-holder, width 36 mm - 12x12, art.110-46.040
Handelaar: SCEMAMA SA
Prijsaanvraag