Technische gegevens
The PPC-28 is made in Europe and eminently suitable for cutting, punching and stamping. Thanks to the threaded M12 holes in the table and the possibility to exchange the table (to a table in a different size), the press can be easily adapted to work with materials of different dimensions.
This C-frame press can be equipped with the punch-tooling from our punching machines.
The table is equipped with a central hole (ø 40 mm): waste from punching operations can fall freely through this hole into the collection tray. The
threaded tip of the M55x2 stamping die makes it possible to apply various types of nuts for installing a tool. This stamping die is standard equipment for this C-frame press.
The piston stroke can be regulated by an electronic controller. It is possible to set the position of the stroke with an accuracy of 0.1 mm. The holding
time of the piston in its lowest position is adjustable from 0 to 2 seconds. The press has two work modes: manual and semi-automatic. Adjusting the speed and pressing force can be done by means of the hydraulic valves. The press is also equipped with a manometer.
Made in Europe and directly available from our stock in the Netherlands.
Handelaar: RHTC BV
Prijsaanvraag