Données techniques
Pos. 1.0 Precision turntable make EIMELDINGEN
with
aerostatic axial bearing
Technical data
Table diameter 3.400
mm
Hight of the table ca. 1.230 mm
Centre bore Ø 250H7X 25 mm
Weight of the workpiece 20.000 kg
Clamping Torque 2.400 daNm
Speed range of the table 0,002 – 2 min
Weight of the table ca. 22.000 kg
Electric conection 380 V, 50 Hz.
Low valtage 24V
Positioning accurancy ± 1"
Of the runout of the table 0,01 mm
ROD accurancy 0,0001°
Pos. 2.0 3-axis
cross-bed boring mill
Technical data
Transverse
column stroke “X” 500
mm
Horizontal
slide stroke “Z” 650
mm
Vertical
headstock “Y” 800
mm
Rapid traverse
speed Y + Z 8.000
mm/min
Feed speed
(infinitely variable) 0-1000
mm/min
Spindle drive
power 15 kW
Spindle
diameter in front bearing 100
mm
Speed range 0-4000 rpm
Taper ISO 50
Accuracies
For all axes
Position tolerance Tp (1000) 0,012
mm
Position spread Ps 0,008
mm
Position deviation PA 0,008
mm
Measurements carried out at room temperature + 20°C.
Pos.
3.0 Grinding device for clamping device
The
grinding unit for the clamping device can be removed and can also be used on
other machines.
It
stands on an adjustable base plate installed under the floor. The opening is
covered during normal operation.
The
motorized grinding unit equipped with a cup grinding wheel can be adjusted in 2
axes using 2 slide units and an intermediate stand.
Adjustment
is carried out manually via fine adjustment spindles.
When
grinding the clamping device, the circular dividing table rotates at a constant
speed.
Grinding
is a manual process.
Diameter,
axial run-out and concentricity are checked with the measuring device in
station 4.
Pos.
4.0 Coolant system/chip disposal
A
generously dimensioned chip and coolant channel runs around the circular
dividing table.
It
is interrupted in the area of unit 1 and feeds coolant and chips into the
central system or onto the chip conveyor.
The
chip conveyor integrated into the intermediate piece between unit 1 and the
circular dividing table substructure is connected to an intermediate tank.
A
float switch-controlled lifting pump pumps the coolant into the paper belt
filter system, which is attached to the main tank.
The
paper belt filter system is equipped with an automatic paper transport
controlled by a float switch. Eine separate Anlage hält das Kühlmittel auf konstanter Temperatur.
Dazu wird das Kühlmittel im Hauptbehälter umgewälzt. Zum Temperaturausgleich
der Gesamtanlage sollte immer eine größere Menge Kühlmittel im Umlauf sein.
Total coolant volume 1.200
l
High-pressure pump for unit 1 60
l/min 10 bar
Low-pressure pump for units 2+3 40
l/min 2 bar
Flushing pump 200
l/min 0.2 bar
The pressure of the high-pressure pump is monitored.
A rinsing hose for cleaning the workpiece and clamping device is
available.
General:
Data of the entire system
Base area of the entire system approx. 8.800 x 10.800 mm
Base area of the actual machine approx. 8.000 x 6.200 mm
Max. Machine height without workpiece approx. 3.700 mm
Max. Machine height with workpiece approx. 5.500 mm
Operating voltage 380
V. 50Hz.
Control voltage 220
V./24 V
Total installed power approx. 55
kW
Max. Power consumption in normal operation approx. 28 kw
Basic color of the machine green
RAL 6011
Total weight of the system approx. 68
to.
Marchand: HILGERT AG
Demande de prix